Kleenoil Bypass Filter Systems

 

 

The Kleenoil Bypass Filter System is a bypass oil filtration system that passes only a small portion of the total oil flow through a very dense filter cartridge at about 2 to 3 quarts per minute. At this speed, it is possible to remove particles down to 1 micron (3 absolute) and remove 99.95% of all water, greatly decreasing engine wear and prolonging oil life. Kleenoil can eliminate water and particle contamination, extend oil life up to 5 times and hydraulic oil up to 10 times, reduce engine wear and component wear, dramatically reduce downtime, remove particles down to 1 micron (3 absolute), and is applicable to engines as well as hydraulic systems.

The Kleenoil USA filtration unit is made of cast aluminum with a galvanized steel mounting bracket. There are five basic sizes, which are installed according to the applications table below. It is connected to the engine lubricating oil circulating system in a bypass loop using high pressure braided hose and fittings to SAE standards.
 
 

 

  KU06 KU16 KU50 KU65 KU85
Photo Gallery

Engine
Sump
Capacity

 Up to 6 Quarts Up to 16 Quarts Up to 50 Quarts Up to 65 Quarts Up to 85 Quarts
Hydraulic Tank Capacity None Up to 60 Gallons Up to 200 Gallons Up to 300 Gallons Up to 400 Gallons
Water Retention <0.05% 0.026 Gallons 0.07 Gallons 0.12 Gallons 0.20 Gallons 0.26 Gallons
0.104 Quarts 0.28 Quarts 0.48 Quarts 0.80 Quarts 1.04 Quarts
Height 6.125 inches 6.25 inches 6.25 inches 6.5 inches 6.75 inches
15.558 cm 15.875 cm 15.875 cm 16.51 cm 17.145 cm
Diameter 3.00 inches 4.63 inches 7.25 inches 9.50 inches 10.0 inches
7.62 cm 11.76 cm 18.415 cm 24.13 cm 25.4 cm
Weight 4.1 lbs 6.5 lbs 8.1 lbs 10.2 lbs 13.1 lbs

Edan Farms Testimonial

Edan Farms has been using PowerUp for over 20 years in all our Semi-tractors. We have been a contractor for Fedex Ground running from 20-30 rigs nearly every day. Each truck travels over 200,000 per year.

One of the first things we noticed when we started using PowerUp is that our engines run cooler. Since using PowerUp, we have not had to overhaul an engine in less than 1 million miles and most we haven't overhauled in less than 1.4 million miles. When we do take the engine apart, it is always very clean, and wear is extremely minimal. In 20 years, we have not had a single differential gear failure due to lubrication.

With PowerUp, we extended our oil drains to 30,000 miles and could have probably run further if we had chosen to.

About 10 years ago, because of your presentation on KleenOil Filtration, we started adding these filter units to our engine. With the continuous purification of the oil and complete removal of water, we now have been able to extend oil drains to well over 300,000 miles per rig. We still sample each engine every 30,000 miles and have been very impressed with the condition of the oil even after these extended oil drains. We have never had an issue due to lubrication with any of the engines.

PowerUp and Kleenoil have saved us thousands upon thousands of dollars in oil changes, engine repairs and overhauls. Presumably, though we have never collected the data, we have saved thousands in fuel costs because the engines maintain their efficiency due to very low wear.

I personally maintain our engines and I am a believer in these products because I have seen the results. I would recommend them to anyone. Please feel free to have anyone call if they have any questions.

Eric Schafer
Edan Farms, Inc.
Maintenance Supervisor
330-770-7746